| » Forum Index » Problems and solutions » Topic: Paths |
|
Posted on 25/11/10 6:48:12 PM |
|
Martti
* Posts: 53 Reply |
Paths
Hello again, How are two open paths selected at the same time? It seems that only Path1 or Path2 can be selected at one time. My aim is to select the paths and then draw lines between the end points and thus get a closed path. Please advice. Thank You, Martti |
Posted on 25/11/10 7:21:57 PM |
|
GKB
Magical Montagist Posts: 4060 Reply  |
Paths
Martti, One way to do it is to open Path 2 and select the path using the Path selection tool. Cmd-C or Ctrl-C to copy the path and then paste it into Path 1 then you just connect them as you wish. Gordon _________________ If at first you don't succeed, destroy all evidence that you ever tried. |
Posted on 26/11/10 07:19:44 AM |
|
Steve Caplin
Administrator Posts: 7072 Reply  |
Re: Paths
The paths don't need to be selected. If you click on the end point of one path, then on the endpoint of the other, they'll join. |
Posted on 27/11/10 3:38:58 PM |
|
Martti
* Posts: 53 Reply |
Re: Paths
GKB & Steve, Thanks for the advice. I will carry on on my long and winding path to PS knowledge. /Martti  |
Posted on 27/11/10 9:50:50 PM |
|
Jota120
Ingenious Inventor Posts: 2615 Reply  |
Re: Paths
... very small hint also, probably off track, rename your work path after you've made it with a bit of work (don't bother if lazy/experimenting), otherwise it will be lost when you make the next one.... (I know!). |